Wing construction is fully sheeted and is very strong. easily built flat, on a small work area. With an efficient airfoil section to give fast clean responsive flight.

The motor mount design accepts 400/480 size brushless power units without re-work . There is adequate room for a separate speed controller in the motor bay area, however we recommend utilising one to the combined motor/controller assemblies for simplicity and value for money. Recommended propellers range from the efficient cost effective push on “Gunther” to precision spinner /CAM prop combinations.

    We can supply all parts required to complete this model as a package if required. (This remove's uncertainty about which components to use ). The package price will vary depending on parts required but will always be very competitive,  

    All hardware (torque rods, elevator snake clevis, wing bolt/nut, wire links etc are supplied). Instructions are simple diagramatic with text . Covering material and glue are required to complete the build. 

    "This really is a superb model for the experienced flyer to have a go at electrics for minimum cost/maximum performance. The model also performs extremely well on the slopes! Simply remove the prop and fit a spinner to protect the motor shaft leave the flight battery in place for ballast and hold your breath for some superb fast passes along the face of the slope."

If you would like further details give us a call or contact us via e-mail

Package deal:-  Swift Evo3 kit, 200Watt Motor & controller and prop, 1 x 9 grm std Servo 1 x 9 grm HP BB Servo for ailerons, 1200 mAh 20C High performance Li-Po flight pack, 4Ch Micro RX and Xtal, connectors, Solite covering material.