Electric Flight Specialist since 1999

            HELP         NEWS         FAQ'S        CONTACT US      HOW TO PAY

AIRCRAFT KITSBATTERIESCABLE AND CONNECTORSCHARGERS AND BALANCERSDUCTED FANSGEARBOXSMATERIALSMOTOR MOUNTSMOTORS (BRUSHED)MOTORS (INRUNNER)MOTORS (OUTRUNNER)PACKAGE DEALSPROPS AND ADAPTORSRADIO CONTROL EQUIPSERVOSSPEED CONTROLLERSSPECIAL OFFERSTOOLS

 

 

Turnigy Accucel-6 50W 5A Balancer/Charger

The Turnigy Accucel 6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The Accucel-6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.

Features;

Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g

This charger has a JST-XH charge plug and we supply the unit with instructions on CD    OUR PRICE £32.99

We also stock a version of the above charger similar in appearance with the same functionality but without inbuilt fan

The HKC6 charger/balancer features programing functionality found in more expensive chargers at a fraction of the cost. Includes plugs and leads as shown. 

Microprocessor controlled,Delta-peak sensitivity (NiMH/NiCd)'Individual cell balancing,Li-ion, LiPo and LiFe capable,Ni-Cd and NiMH capable,Store function, allows safe storage current,Fast charge Function,Data store/load,Backlit LCD

Operating voltage range: 10.0~18.0Volt
Circuit power: max.50W for charging, max.5W for discharging
Charge current range: 0.1~5.0A
Discharge current range: 0.1~1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/ NiMH battery cell count: 1~15cells
Lithium battery cell count: 1~6Series
Pb battery voltage: 2 to 20V
Dimension: 135×100×40mm

This charger has a JST-XH charge plug and we supply the unit with instructions on CD  OUR PRICE £24.99

                

                                                                                          HOME

                               CONDITIONS OF USE       PRIVACY POLICY       SHIPPING AND RETURNS

                                                                          Copyright 2007 Concept Models