Essential tool for checking individual cell
voltages. Simply connect to the balance plug (XH or similar
2.5mm pitch connector) on your Li-Po
battery pack and the cell voltages are displayed in sequence
followed by total pack voltage!
We recommend if cell voltages vary by are more than 0.05v
you should perform a balance charge. Dependant on condition and
quality of your battery packs it is not necessary to balance
charge every time the pack is charged.
You can also use it to check
that your speed controller voltage cut off is set / operating
correctly! Simply connect to the balance plug while running the
motor and observe cell voltages when the controller is about
to cut the power, incorrect setting or poor cell performance will be identified.